september 2011 doc id 13565 rev 2 1/10 10 t1035h, t1050h high temperature 10 a snubberless? triacs features medium current triac 150 c max. t j turn-off commutation low thermal resistance with clip bonding very high 3 quadrant commutation capability packages are rohs (2002/95/ec) compliant ul certified (ref. file e81734) applications especially designed to operate in high power density or universal motor applications such as vacuum cleaner and washing machine drum motor, these 10 a triacs provide a very high switching capability up to ju nction temperatures of 150 c. the heatsink can be reduced, compared to traditional triacs, according to the high performance at given junction temperatures. description available in through-hole or surface mount packages, the t1035h and t1050h triacs series are suitable for general purpose mains power ac switching. by using an internal ceramic pad, the t10xxh-6i provides voltage insulation (rated at 2500 v rms). tm : snubberless is a trademark of stmicroelectronics table 1. device summary symbol value unit i t(rms) 10 a v drm /v rrm 600 v i gt 35 or 50 ma a2 a1 g a2 a2 a1 g a2 a2 a1 g a2 a1 g d 2 pak t10xxh-6g to-220ab t10xxh-6t to-220ab insulated t10xxh-6i www.st.com
characteristics t1035h, t1050h 2/10 doc id 13565 rev 2 1 characteristics table 2. absolute maximum ratings symbol parameter value unit i t(rms) on-state rms current (full sine wave) d 2 pak, to-220ab t c = 135 c 10 a to-220ab ins t c = 125 c i tsm non repetitive surge peak on-state current (full cycle, t j initial = 25 c) f = 50 hz t = 20 ms 100 a f = 60 hz t = 16.7 ms 105 i 2 ti 2 t value for fusing t p = 10 ms 66 a 2 s di/dt critical rate of rise of on-state current i g = 2 x i gt , t r 100 ns f = 120 hz t j = 150 c 50 a/s v dsm /v rsm non repetitive surge peak off-state voltage t p = 10 ms t j = 25 c v drm /v rrm + 100 v i gm peak gate current t p = 20 s t j = 150 c 4 a p g(av) average gate power dissipation t j = 150 c 1 w t stg t j storage junction temperature range operating junction temperature range - 40 to + 150 - 40 to + 150 c table 3. electrical characteristics (t j = 25 c, unless otherwise specified) symbol test conditions quadrant value unit t1035h t1050h i gt (1) v d = 12 v, r l = 33 i - ii - iii max. 35 50 ma v gt i - ii - iii max. 1.0 v v gd v d = v drm , r l = 3.3 k i - ii - iii min. 0.15 v i h (2) i t = 500 ma max. 35 75 ma i l i g = 1.2 i gt i - iii max. 50 90 ma ii 80 110 dv/dt (2) v d = 67% v drm, gate open, t j = 150 c min. 1000 1500 v/s (di/dt)c (2) without snubber, t j = 150 c min. 13 18 a/ms 1. minimum i gt is guaranted at 20% of i gt max. 2. for both polarities of a2 referenced to a1.
t1035h, t1050h characteristics doc id 13565 rev 2 3/10 table 4. static characteristics symbol test conditions value unit v t (1) i tm = 14 a, t p = 380 s t j = 25 c max. 1.5 v v t0 (1) threshold voltage t j = 150 c max. 0.80 v r d (1) dynamic resistance t j = 150 c max. 34 m i drm i rrm (2) v drm = v rrm t j = 25 c max. 5 a t j = 150 c max. 3.6 ma v d /v r = 400 v (at peak mains voltage) t j = 150 c max. 3.0 v d /v r = 200 v (at peak mains voltage) t j = 150 c max. 2.5 1. for both polarities of a2 referenced to a1. 2. t p = 380 s table 5. thermal resistance symbol parameter value unit r th(j-c) junction to case (ac) d 2 pak / to-220ab 1.45 c/w to-220ab ins 3.4 r th(j-a) junction to ambient s = 1 cm 2 d 2 pa k 4 5 to-220ab / to-220ab ins 60
characteristics t1035h, t1050h 4/10 doc id 13565 rev 2 figure 1. maximum power dissipation versus on-state rms current (full cycle) figure 2. on-state rms current versus case temperature (full cycle) 0 1 2 3 4 5 6 7 8 9 10 11 012345678910 p(w) =180 180 i t(rms) (a) i t(rms) (a) 0 2 4 6 8 10 12 0 25 50 75 100 125 150 =180 to-220ab insulated to-220ab/d2pak t c (c) figure 3. on-state rms current versus ambient temperature figure 4. variation of thermal impedance versus pulse duration 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0 25 50 75 100 125 150 i t(rms) (a) =180 d2pak s cu =1 cm2 t amb (c) epoxy printed circuit board fr4, copper thickness = 35 m 1.0e-01 1.0e+00 1.0e+01 1.0e+02 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 1.0e+02 1.0e+03 z th (c/w) z th(j-a) z th(j-c) t p (s) figure 5. on-state characteristics (maximum values) figure 6. surge peak on-state current versus number of cycles 1 10 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 i tm (a) t j =25 c t j =150 c t j max. : v t0 = 0.80 v r d = 34 m v tm (v) 0 10 20 30 40 50 60 70 80 90 100 110 1 10 100 1000 i tsm (a) non repetitive t j initial=25 c repetitive t c =125 c one cycle t=20ms number of cycles
t1035h, t1050h characteristics doc id 13565 rev 2 5/10 figure 7. non-repetitive surge peak on-state current for a sinusoidal pulse with figure 8. relative variation of i gt ,i h , i l vs junction temperature (typical values) figure 9. relative variation of critical rate of decrease of main current (di/dt)c versus reapplied (dv/dt)c figure 10. relative variation of critical rate of decrease of main current versus junction temperature figure 11. leakage current versus junction temperature for different values of blocking voltage (typical values) figure 12. variation of thermal resistance junction to ambient versus copper surface under tab 10 100 1000 10000 0 . 0 1 0 .1 0 1. 00 1 0 . 00 i tsm (a), i2t (a2s) tj initial=25 c di/dt limitation: 50 a/s i tsm i2t t p (ms) width t < 10 ms and corresponding value of i t p 2 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 120 140 160 i gt ,i h ,i l [t j ] / i gt ,i h ,i l [t j =25 c ] i gt i h & i l t j (c) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.1 1.0 10.0 100.0 (di/dt) c [(dv/dt) c ] / specified (di/dt) c (dv/dt) c (v/s) typical values 0 1 2 3 4 5 6 7 8 25 50 75 100 125 150 (di/dt) c [t j ] / (di/dt) c [t j =150c] t j (c) 1.0e-01 1.0e+00 1.0e+01 1.0e+02 1.0e+03 1.0e+04 50 75 100 125 150 i drm /i rrm (a) v drm =v rrm =400 v v drm =v rrm =400 v v drm =v rrm =600 v v drm =v rrm =600 v v drm =v rrm =200 v v drm =v rrm =200 v t j (c) 0 10 20 30 40 50 60 70 80 0 5 10 15 20 25 30 35 40 r th(j-a) (c/w) d2pak s cu (cm2) epoxy printed circuit board fr4, copper thickness = 35 m
ordering information scheme t1035h, t1050h 6/10 doc id 13565 rev 2 2 ordering information scheme figure 13. ordering information scheme t 10 xx h - 6 y -tr triac series current sensitivity package 10 = 10 a 35 = 35 ma 50 = 50 ma g = d 2 pa k high temperature voltage packing 6 = 600 v t = to-220ab i = to-220ab ins blank = tube (d 2 pak, to-220ab) -tr = tape and reel (d 2 pak)
t1035h, t1050h package information doc id 13565 rev 2 7/10 3 package information epoxy meets ul94, v0 recommended torque 0.4 to 0.6 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 14. footprint (dimensions in mm) table 6. d 2 pak dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 4.30 4.60 0.169 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.25 1.40 0.048 0.055 c 0.45 0.60 0.017 0.024 c2 1.21 1.36 0.047 0.054 d 8.95 9.35 0.352 0.368 e 10.00 10.28 0.393 0.405 g 4.88 5.28 0.192 0.208 l 15.00 15.85 0.590 0.624 l2 1.27 1.40 0.050 0.055 l3 1.40 1.75 0.055 0.069 r 0.40 0.016 v2 0 8 0 8 g l l3 l2 b b2 e 2mm min. flat zone a c2 d r a2 v2 c a1 16.90 10.30 8.90 3.70 5.08 1.30
package information t1035h, t1050h 8/10 doc id 13565 rev 2 table 7. to-220ab and to-220ab ins dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 b 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 c 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 f 6.20 6.60 0.244 0.259 ?i 3.75 3.85 0.147 0.151 i4 15.80 16.40 16.80 0.622 0.646 0.661 l 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 m2.60 0.102 c b2 c2 f ? i l a a1 a2 b e b1 i4 l3 l2 c1 m
t1035h, t1050h ordering information doc id 13565 rev 2 9/10 4 ordering information 5 revision history table 8. ordering information order code marking package weight base qty delivery mode t10xxh-6g t10xxh 6g d 2 pak 1.5 g 50 tube t10xxh-6g-tr t10xxh 6g d 2 pak 1.5 g 1000 tape and reel t10xxh-6t t10xxh 6t to-220ab 2.3 g 50 tube t10xxh-6i t10xxh 6i to-220ab ins 2.3 g 50 tube table 9. document revision history date revision changes 17-apr-2007 1 first issue 20-sep-2011 2 updated : features , description and figure 2 .
t1035h, t1050h 10/10 doc id 13565 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
